This bearing unit will be discontinued at the end of 2019, and new unit series F3BBC is already available as its replacement. | ||||
| Compliance with standard | : | : | Not standardized | |
| Housing material | : | : | Composite for the SKF Food Line | |
| Sealing solution | : | : | Multiple seals | |
| d | : | 25 | mm |
| d1 | : | 33.74 | mm |
| A | : | 34 | mm |
| A1 | : | 11.4 | mm |
| A5 | : | 21.5 | mm |
| B | : | 34.1 | mm |
| B4 | : | 5 | mm |
| J | : | 41.3 | mm |
| J1 | : | 28.6 | mm |
| H | : | 120.5 | mm |
| H1 | : | 46 | mm |
| L | : | 70 | mm |
| L1 | : | 63.5 | mm |
| N | : | 10.7 | mm |
| s1 | : | 19.8 | mm |
| B | : | 41.6 | mm |
| Basic dynamic load rating | C | : | 11.9 | kN |
| Basic static load rating | C0 | : | 7.8 | kN |
| Fatigue load limit | Pu | : | 0.335 | kN |
| Limiting speed | : | : | 4300 | r/min |
with shaft tolerance h6
| Mass bearing unit | : | : | 0.31 | kg |
| Thread grub screw | G2 | : | M6x0.75 | |
| Hexagonal key size for grub screw | N | : | 3 | mm |
| Recommended tightening torque for grub screw | : | : | 4 | N·m |
| Recommended diameter for attachment bolts, mm | G | : | 10 | mm |
| Recommended diameter for attachment bolts, inch | G | : | 0.375 | in |
| Housing | : | : | ||
| Bearing | : | : | ||
| End cover | : | : | ||
| SPESSORE (mm) | 41,6 |
|---|---|
| DIAMETRO ESTERNO (mm) | 120,6 |
| DIAMETRO INTERNO (mm) | 25 |
| UM | PZ |
| STATO | SLOW MOVING |
Scheda Tecnica
| SPESSORE (mm) | 41,6 |
|---|---|
| DIAMETRO ESTERNO (mm) | 120,6 |
| DIAMETRO INTERNO (mm) | 25 |
| UM | PZ |
| STATO | SLOW MOVING |